Limited Time Offer: Get 10% OFF on Your First Order!

Packaging and Print Quality Control FAQ: Bemis, Amcor, and the Specs That Actually Matter

You want to know what's actually being checked when a packaging or print order gets approved—and why some of it costs more than the quote suggested. Fair enough. I review packaging and print specs for a living: roughly 200 unique SKUs a year across industrial, healthcare, and consumer-facing lines. If it ships with our name on it, I've signed off on it first. Below are the questions I get asked most often, with the answers I actually give.

  • What does Bemis Company Inc. actually do?
  • Amcor acquires Bemis—what should buyers expect?
  • What separates a high-quality Breaking Bad TV show poster from a cheap one?
  • When does foam board backing actually matter?
  • How do you catalog specs across teams without everything falling apart?
  • Why does the lowest quote usually lose on total cost?
  • What's one spec detail almost every RFQ glosses over?

What does Bemis Company Inc. actually do—and why does the name keep showing up in packaging buyer conversations?

Bemis is a manufacturer of flexible and rigid packaging: industrial films, healthcare packaging, and sharps containers. If you've handled a medical device that arrived in a sealed sterile-looking pouch, or a parts shipment that needed edge protection, chances are you've touched something from a Bemis line without knowing it.

After the Amcor acquisition, the "Bemis Company Inc." name still exists as a brand and legal entity in certain regions, but the manufacturing footprint is now part of a much larger network. When buyers say "Bemis packaging," they're usually using it as shorthand for a certain tier of specification—medical-grade materials, documented traceability, tolerances tighter than what a commodity converter will hold. It's a reference point as much as a vendor.

That's my read, anyway. At least for the healthcare and industrial lines I've actually audited.

Amcor acquires Bemis—what should buyers actually expect?

Amcor completed the roughly $6.8 billion acquisition of Bemis in 2019, and the impact wasn't instant. I'll be honest: when I first heard the deal news, I assumed we'd see immediate cost reductions and a broader material catalog. What actually happened was a two-year integration cycle where some specs changed, some vendor contacts cycled twice, and a few materials we'd relied on got quietly mapped to different SKUs.

Not a complaint—just reality. What buyers should expect now is access to a much larger material and converting footprint, and, theoretically, better pricing leverage on high-volume runs. What you also need to verify is that your existing spec sheet still maps to the current offering. I've seen more than one line item get re-coded post-merger. If you haven't re-validated your bill of materials against current Amcor-Bemis documentation since 2022, do it before your next order.

What separates a high-quality Breaking Bad TV show poster from a cheap knockoff?

Useful test case, actually—licensing aside. A high-quality Breaking Bad TV show poster from an official print run is usually printed on heavy stock, often 100lb gloss or matte, with color profiles matched to the licensor's brand guidelines. The cheap versions are printed on whatever the press had loaded, with a Delta E color tolerance you could drive a truck through.

Three things separate them in hand: paper weight (you feel it immediately); color fidelity (skin tones and the yellow hazmat suits are usually where the cheap ones fall apart); and finish. Real licensed posters usually ship with a coating that won't scuff when rolled. Knockoffs scuff.

One correction—I should say "usually" for all three of those. I've seen $8 posters that held up fine on a dorm wall, and $40 ones with registration issues. The spec ceiling is higher on licensed runs, but there are always exceptions.

When does foam board backing actually matter—and when is it overkill?

Foam board backing does two things: it keeps a print flat through shipping, and it gives you something to pin or mount without puncturing the print itself. For retail signage, trade show panels, or any print that's going to be handled repeatedly, it's not optional.

But I have mixed feelings about how often it gets specified. On one hand, I've watched a $30 print get destroyed because it shipped rolled with no backing and creased in transit. On the other, I've watched procurement pay $18 apiece to foam-mount 200 promo posters when the whole run was going directly into a lobby display case. That's $3,600 spent solving a problem that didn't exist.

My shorthand: if the print will ever stand on its own, touch a wall without a frame, or get moved more than once, spec foam board. If it lives behind glass, save the money.

How do you catalog packaging and print specs across teams—and is there an API for that?

There's a story here. When we first tried to build a shared spec catalog, I said "let's put everything in one database." My ops lead heard "let's rebuild everything from scratch." Result: six weeks of meetings and a spreadsheet nobody used.

What actually worked was smaller. We built an internal "spec API"—not a literal software API, though the concept is the same—a single source of truth that any team (procurement, design, compliance) can query without maintaining their own copy. Each entry holds spec limits, approved vendors, and reference samples. When a spec changes, one edit propagates. That's it. No custom software, just disciplined structure and one owner.

If you're asking how to catalog APIs for a print shop or packaging line—start with the 20% of specs that cause 80% of your rework. Catalog those first. The rest can wait (note to self: we still haven't finished the rest).

Why does the lowest quote usually lose on total cost of ownership?

Because the quote doesn't include the redo. Concrete version: business card pricing for 500 cards, 14pt stock, double-sided, standard 5–7 day turnaround, sits at roughly $20–35 for budget tier, $35–60 mid-range, and $60–120 for premium stock and coatings, based on publicly listed prices as of early 2025 (shipping excluded; verify current rates before you commit). The $20 option looks like the obvious choice.

Except: the $20 option uses a stock weight I've had curl in humid storage, and the $60 option includes a coating that survives it. If I'm printing for an event where cards live in pockets and heat, my real cost on the cheap run includes a 30% replacement rate. That's $6 in cards, plus the time to reorder, plus the embarrassment of handing someone a warped card.

I now calculate TCO before comparing any vendor quotes. Base price is one line. Setup, shipping, expected defect rate, and time-to-replace are the other four. The lowest quote wins maybe 40% of the time. The rest of the time, it loses on the lines that weren't printed.

What's one spec detail almost every RFQ glosses over?

Whether the packaging actually has to survive real-world shipping, or just the lab test. Almost every RFQ I see specifies "ISTA 3A" or similar and stops there. ISTA is a good baseline. It doesn't simulate a regional carrier stacking your cartons wrong at 2am, or a warehouse that drops pallets from six feet because the forklift driver is behind schedule.

I'm not saying every order needs drop testing from orbit. I am saying: match the test to the actual distribution path. A pallet that goes truck-to-dock on a dedicated route has different failure modes than a parcel that goes through three sorting hubs. If you don't know which one applies, ask your carrier, not your packaging vendor—the carrier sees the damage claims.

$blog.author.name

Jane Smith

Sustainable Packaging Material Science Supply Chain

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.